加为收藏 | 设为首页 | 在线留言 | 董事长办室
 
 
 产品分类
 联系我们
苏州市江南电器桥架有限公司
地 址:江苏省苏州市吴江区
    同里镇汽车站对面
电 话:0512-63333558
手 机:13606250121
传 真:0512-63331634
厂 长:吴建新
邮 编:215217
网 址:www.jnqj.cn
邮 箱:wjx@jndq888.com
 产品展示 产品类型 >>  载荷能力  
载荷能力
点击放大
  玻璃钢槽式电缆桥架在不同跨距下最大允许均布载荷曲线图。
  The maximum permitted average layout load curve chart for the glass steel slot-type cable bridge at the different span.

  槽式钢制电缆桥架在不同跨距下最大允许均布载荷曲线图。
  The maximum permitted average layout load curve chart for the steel slot-type cable bridge at the different span.

  梯级式钢制电缆桥架在不同跨距下最大允许均布载荷曲线图。
  The maximum permitted average layout load curve chart for the steel step-type cable bridge at the different span.

安装与维护
  1、桥架高度为50、100时每端各6只连接子L,高度为150,200时每端各12只连接孔。
  2、支撑间距:支撑间距应小于等于载荷曲线允许载荷和支撑跨距。
  3、桥架宽度:选择电缆桥架的宽度时,应留有一定的备用空位,以便为今后增添电缆用。
  4、隔开敷设:当电力电缆和控制电缆较少时,可以在同一电缆桥架安装,但中间须用隔板将电力电缆和控制电缆隔开敷设。
  5、电缆固定:汇线桥架水平敷设时,桥架之间的连接应尽量设置在跨距1/4处。水平走向的电缆每隔2米左右固定一下,垂直走向的电缆每隔1.5米左右固定一下。
Installtin & Maintenance
  1.The heiqhl of cable bridge is 50 and 100 and there are 6 connecting holes at both ends;and heihth 150 and 200,12holes.
  2.Spacing Distance of Supporting:The spacing distance and load should be equal to or less than the span and the load allowed by the Load curve.
  3.Width of cable bridge:When choosing the width of cable bridge,there should keep some of reserve space for additional cables in future.
  4.Separati re Laying:When the little amount of power cable and control cable are used,they can be together installed in the same bracket.but the separatinq wall must be used between them.
  5.Fixation of Cable:When the cable bridges are horizontally laid.the connection between frames should be possibly set up within 1/4 of a span,And a fixation should be made every 2 meters on the horizontal run cable,but every 1.5m on the vertical run cable.
关闭窗口
  Copyright @ 2003 WWW.JNDQ.CN All rights reserved 版权所有 苏州市江南电器桥架有限公司 吴江市江南电器桥架厂  苏州桥架 吴江桥架
版权声明:文字及图片等资料未经许可不得转载,如本站有冒犯请邮件,本站收到邮件查明会马上删除。  网站备案/许可证号:苏ICP备10225198号-3